Intel® Server Board S2600CO Family TPS On-board Connector/Header Overview
Revision 1.4
Intel order number G42278-004
89
Table 35. Intel
®
RAID C600 Upgrade Key Connector Pin-out (STRO UPG KEY)
Pin Signal Name
1 GND
2 FM_PBG_DYN_SKU_KEY
3 GND
4 FM_SSB_SAS_SATA_RAID_KEY
8.3.5 HSBP_I
2
C Header
Table 36. HSBP_I
2
C Header Pin-out (HSBP_I
2
C)
Pin Signal Name
1 SMB_HSBP_3V3STBY_DATA
2 GND
3 SMB_HSBP_3V3STBY_CLK
8.3.6 HDD LED Header
The server board includes a 2-pin hard drive activity LED header used with some SATA/SAS
controller add-in cards. On the server board, this header is labeled HDD LED. The header has
the following pin-out.
Table 37. Hard Drive Acitivity Header Pin-out (HDD_LED)
Pin
Signal Name
1 LED_HDD_ACT_N
2 TP_LED_HDD_ACT
8.3.7 Internal Type-A USB Connector
The server board includes one internal Type-A USB connector labeled USB_4. The following
table provides the pin-out for this connector.
Table 38. Internal Type-A USB 2.0 Connector Pin-out (USB_4)
Pin
Signal Description
1 +5V
2 USB_N
3 USB_P
4 GND
8.3.8 Internal 2mm Low Profile eUSB SSD Connector
The server board includes one 10-pin 2mm low profile connector with an intended usage of
supporting low profile eUSB SSD devices. On the server board this connector is labeled
eUSB_SSD. The following table provides the pin-out for this connector.
To Next Page
Loading...
Need help?
General
