40 Intel Server Board STL2 Product Guide
System Hardware Menu
You can make the following selections on the Server Menu itself.
Feature Choices Description
Wake On Event Enters submenu.
AC-LINK Stay Off
Last State
Power On
Sets what happens when AC power is lost and restored.
Stay Off means the server will not power up. Last State
means the server will power up if it was powered when
AC was lost. Power On means the server will always
power up when AC is regained.
Error Log Initialization Press <Enter> key Clears the SEL.
Console Redirection Enters submenu.
Wake on Event Submenu
Feature Choices Description
Wake On LAN
†
Disabled
Enabled
Enables remote power on via network command.
Wake On Ring Disabled
Enabled
Enables remote power on via serial port.
Console Redirection Submenu
Feature Choices Description
COM Port Address Disabled
Serial Port 2 (3F8/IRQ4)
Serial Port 2 (2F8/IRQ3)
When enabled, console redirection uses the I/O port
specified. All keyboard/mouse and video will be
directed to this port. This is designed to be used only
under DOS in text mode.
Baud Rate 57.6K
19.2k
When console redirection is enabled, specifies the baud
rate to be used.
Flow Control No Flow Control
XON/XOFF
None disallows flow control.
XON/XOFF is software-flow control.
Console Connection Direct
Via modem
Sets what the console connection is.
Boot Menu
Feature Device Description
Boot Diagnostics Screen Enabled
Disabled
Boot Device Priority Enters submenu.
Hard Drive Enters submenu.
Removable Devices Enters submenu.
To Next Page
Loading...
Need help?
General
