Configuration Software and Utilities 41
Boot Device Priority Submenu
Use the up or down arrow keys to select a device; then press the <+> or <-> keys to move the
device higher or lower in the boot priority list.
Boot Priority Device Description
1. Diskette Drive Attempts to boot from the diskette drive.
2. ATAPI CD-ROM Drive Attempts to boot from an ATAPI CD-ROM drive.
3. Hard Drive Attempts to boot from a hard drive device.
4. Intel UNDI, PXE-2.0 Attempts to boot from a network connection.
Requires the presence of a PXE server.
Hard Drive Submenu
Choices Description
Hard Drive 1 Autodetected hard drive.
Hard Drive 2 Autodetected hard drive.
Hard Drive 3 Autodetected hard drive.
Bootable Add in Card Autodetected Add-in card.
Removable Devices
Choices Description
Diskette A Autodetected diskette drive.
Exit Menu
You can make the following selections on the Exit Menu. Select an option using the up or down
arrow keys; then press <Enter> to execute the option. Pressing <Esc> does not exit this menu.
You must select one of the items from the menu or menu bar to exit.
Choices Description
Save Changes & Exit Exits after writing all modified Setup item values to NVRAM.
Exit Without Saving Change Exits leaving NVRAM unmodified.
Get Default Values Loads default values for all Setup items.
Load Previous Values Loads values of all Setup items from previously saved custom defaults.
Save Changes Writes all Setup item values to NVRAM.
To Next Page
Loading...
Need help?
General
