113
Specification
Antenna System
Antenna Radome Height 1454 mm (57.44")
Antenna Radome Diameter Ø1379 mm (54.29")
Antenna Reector Diameter Ø1050 mm (41.33")
Antenna Unit Weight (with Radome) 113 kg (249.12 Ibs)
Platform 3-axis: Azimuth, Elevation, Cross-level
Positioning
3-axis Velocity Mode Servo Control:
Azimuth, Elevation, Cross-Level
Azimuth Range Unlimited
Elevation Range -20° to +115°
Cross-level Range Up to ±37º
Stabilization Accuracy 0.2° peak mispointing @max ship motion condition
Motor Brake System Dynamic Brake
Ship's motion
Roll ±25° at 6 second
Pitch ±15° at 6 second
Yaw ±8° at 6 second
Turning Rate Up to 12°/sec & 5°/sec
RX
Frequency 19.2 GHz ~ 20.2 GHz Ka-band
Gain 44 dBi @ 19.7 GHz (with radome)
Tx
Frequency 29 GHz ~ 30 GHz Ka-band
Gain 47.7 dBi @ 29.5 GHz (with radome)
Above Deck IFL Termination
1 x 50 Ohm N-type female connector
TX/RX: 10 MHz, 50 MHz, 400 MHz, 433 MHz
L-band (950 MHz ~ 2150 MHz)
DC power to BUC & pedestal (and LNB)
G/T over Rx Range at Elevation Angle
Min. 30 deg.
Min. 20.1 dB/K @ 19.7 GHz (with radome)
Polarization Circular (Rx: LHCP, Tx: RHCP)
BUC 5 W (standard), 10 W (optional)
BDT to ADU Cable (Antenna Cable)
Single 50 coax cable for Rx, Tx, FSK, Reference and Power
from BDT to ADU
Input power 48 V DC (max 300 W) through Single RF Cable
Below Deck Termial (BDT)
BDT Size 431 mm x 411 mm x 44.3 mm
BDT Weight 5.7 kg
Display 256 x 64 Graphic OLED
Key Two Push Keys
LED Indicator Three LEDs for Power, Tracking and Error
USB Port 2ea (front panel), 1ea (rear panel, for Wi-Fi dongle)
Ship's Gyrocompass Interface NMEA 2000, NMEA 0183
Serial Interface Console RS-232C (57600bps 8, N, 1)
Specification
Technical Specication
To Next Page
Loading...
Need help?
General
