33
Installing Above Deck Unit (ADU)
Switching On Power Box
Access the ADU modules inside the radome to check that the power switch is on through the radome hatch.
Make sure that there is sufcient free space underneath the ADU to open the radome hatch.
1. Bring the radome door key from the BDT box. Open the radome hatch by turning the xed bolts
counterclockwise by using the radome door key.
2. The power box switch was turned on and shipped from the factory. Check the power box inside the
radome is switch on. If not, switch on the power box.
3. Put the radome hatch in the right place. Close the radome hatch by turning the xed bolts clockwise by
using the radome door key.
NOTE
NOTE
After using the door key, store it in a safe place for future use.
Door Key Provided
To Next Page
Loading...
Need help?
General
