Isuzu 2008 N Series User Manual

General Information 0A-21
3. Gently pull the harness and check whether the
terminal is completely locked inside the connector.
Replacing the fuse
WARNING:
If a fuse melts down, make sure to replace it with a non-
defective fuse of the same capacity, after identifying the
cause of the melt down.
If you use a fuse with high capacity, the fuse will not
perform its function when excess current flows. This
may cause parts or wires, etc. to burn, and can result in
a vehicle fire.
Handling Electronic Parts
Handle electronic parts with sufficient care, and do not
damage the parts by dropping or throwing them.
Cable Harness
1. When installing electronic parts, take care to
ensure the harness does not get stuck and do not
forcibly push the harness in.
2. Make sure that all connections are clean and
secure.
LNW20ASH002001
2
3
1
LNW20ASH002101
10 15
30A 60A
LNW20ASH002201
LNW20ASH002301
LGGEN-WE-0871_7th.book 21 ページ ２００９年１０月１日 木曜日 午後３時２６分
mechanikar

Isuzu 2008 N Series Specifications

General

Brand	Isuzu
Model	2008 N Series
Category	Automobile
Language	English