3-3
HANDLING OF ENGINE
CAUTION
Do not perform the starting operation while
the preheat indicator light is on.
•
3. After confirming that the preheat indicator light has gone out, turn the starter
switch to the "START" position to start the engine.
4. When the engine is not started with one operation, turn the battery and starter
switches to "OFF". Have a break of 60 seconds or longer for starter functionality
recovery and engine controller (ECM) communication process, and then perform
the starting operation again.
CAUTION
When an abnormal sound is heard from the starter, if the starting operation is
continued, the starter can be burned out.
When the starting operation is performed repeatedly, starting the next motion
without waiting for the starter to stop completely may damage or break the
starter pinion and the engine ring gear.
Starter failure may occur if the engine is started when the battery has not been
sufficiently charged.
•
•
•
5. When the engine is not started after the starting operating is performed
repeatedly, an abnormality in the starting system can be suspected, so inspect
the related parts.
CAUTION
Do not turn the starter switch to the "OFF" position while the engine is running.
This may cause a failure of the machine.
Do not apply a starting aid to the intake system. This may damage the engine.
•
•
ADVICE
Before starting the engine in cold weather, be sure to perform preheating.
When it is difficult to start the engine, let it stand for a while to allow the battery
to recover, perform adequate preheating, and then start the engine.
In the cold season, when the engine is cold, the exhaust smoke (white smoke)
may increase.
•
•
IDE-6450A4500781ALL.indd3-3IDE-6450A4500781ALL.indd3-3 2014/04/1814:19:532014/04/1814:19:53
To Next Page
Loading...
Need help?
General
