Isuzu 4LE2 User Manual

3-2
HANDLING OF ENGINE
Starting the Engine
Starting Preparation
1. Before starting the engine, confirm that the
machine is not set to the operation/driving
mode and each switch such as for the
windshield wiper, lighting, and air conditioner
on the machine side is turned to "OFF".
2. When the battery switch is equipped, turn it
to the "ON" position.
3. Turn the starter switch to the "DRIVE"
position and check the lighting of each
warning/indicator light and the fuel level.
4. The engine emergency stop function may
be set depending on machine specifications.
Confirm that the engine emergency stop
function is turned "OFF" before starting the
engine.
For the engine emergency stop switch,
etc., refer to the instruction manual of the
machine manufacturer as well.
Starting the Engine
WARNING
Do not keep the starter switch turned for longer than 20 seconds. Doing so
may cause starter or battery failure, possibly resulting in a fire.
Make sure that no flammable material is present in the direction of exhaust
outlet when starting the engine. If flammable material is present, it is very
dangerous as such material may catch fire.
•
•
1. Place the accelerator, throttle and operation
levers to the idling position.
2. Turn the starter switch to the "DRIVE"
position. Also, when the preheat indicator
light comes on, wait until it turns off.
This may not come on depending on the
conditions.
OFF
DRIVE
START
AUTO RETURN
OFF
DRIVE
START
AUTO RETURN
OFF
DRIVE
START
AUTO RETURN
OFF
DRIVE
START
AUTO RETURN
IDE-6450A4500781ALL.indd3-2IDE-6450A4500781ALL.indd3-2 2014/04/1814:19:522014/04/1814:19:52

Isuzu 4LE2 Specifications

General

Brand	Isuzu
Model	4LE2
Category	Engine
Language	English