Isuzu 4LE2 User Manual

3-5
HANDLING OF ENGINE
CAUTION
For the following cases, immediately stop the engine, check the oil level and
inspect for an oil leakage.
The oil pressure gauge reads 200 kPa (2 kgf/cm²/28 psi) or below even
when the engine speed is raised
The needle of the oil pressure gauge swings widely at low rotation speeds
The oil pressure warning light flashes or comes on
When the oil level is normal and no oil leak is found, a failure in the hydraulic
system can be suspected. Promptly consult an Isuzu Distributor.
•
-
-
-
•
Engine Warning Light/Engine Failure Code
CAUTION
When the failure indicator light comes
on, or the engine failure code is indicated
in the liquid crystal display (LCD) on
the machine, promptly contact an Isuzu
Distributor.
•
Generator Warning Light
When a current meter is equipped and the
charging status is normal, the needle of the
current meter swings to the plus direction
immediately after the engine is started, and then
the amplitude gradually becomes smaller.
For the machine with the generator warning light
equipped, make sure to confirm that the generator
warning light turns off.
IDE-6450A4500781ALL.indd3-5IDE-6450A4500781ALL.indd3-5 2014/04/1814:19:542014/04/1814:19:54

Isuzu 4LE2 Specifications

General

Brand	Isuzu
Model	4LE2
Category	Engine
Language	English