Quick Reference
1.6 VFD Indicator Lamps Description
This series instrument VFD indicator lamps description is as follows:
Table 1–1 VFD Indicator Lamps Description
Flag Function
Description
Flag Function Description
OFF The output of the
power supply is
turned off.
Sense Sense function of the power
supply is enabled.
CV The power supply is
in a state of con-
stant voltage
output.
Rear Analog function begin to
work.
CC The power supply is
in a state of con-
stant current output.
Addr When received command
successfully, the flag will
display 3 seconds.
* The keyboard lock
is turned on.
Rmt Indicates that the instrument
is working in remote control
mode.
CR None Error Error occur
Shift Using composite
function key
Prot The instrument enters the
protection state.
SRQ Indicates that the
internal status re-
quest event occurs.
Trig The instrument is in a state
of waiting for a trigger.
CW The power supply is
in a state of con-
stant power output.
- -
1.7 Configuration Menu Function
This section gives an overview of the configuration menu of the this series
instrument.
The procedures to operate the configuration menu are as follows.
Copyright © Itech Electronic Co., Ltd.
9
To Next Page
Loading...
Need help?
General
