Acceptance and Installation
Copyright © Itech Electronic Co., Ltd. 4
Note
Do not use excessive force when installing or removing the handle to
prevent pinching.
1.4 Installation of Support
The IT6300 Series power supplies can be installed on a standard 19-inch
support. IT-E151/ IT-E151A is an accessory prepared for user. The user can
select the corresponding manual according to the purchased support model to
install.
1.5 Connecting the Power Cord
Connect power cord of standard accessories and ensure that the power is
under normal power supply.
AC power input level
Working voltage of IT6300 series includes 110V and 220V (which can be
selected by the switch at the bottom of power supply).
AC power input level:
Option Opt.01: 220VAC ± 10%, 47 to 63 Hz
Option Opt.02: 110 VAC ± 10%, 47 to 63 Hz
Categories of power cords
Select from the flowing schedule of power cord specifications an appropriate
power cord that matches the voltage for the area in which you use the
instrument. If the power cord included in the instrument you purchased does
not match the voltage, contact the dealer or manufacturer for change.
To Next Page
Loading...
Need help?
General
