ITech IT6300 Series User Manual

Quick Start
Copyright © Itech Electronic Co., Ltd. 5
Chapter2 Quick Start
This chapter introduces the front panel, the rear panel, key functions and VFD
display function of the power supply, make sure that you can quickly know the
appearance, instruction and the key function before you operate the power
supply, help you make better use of this series of power supply.
2.1 Brief Introduction
IT6300 series triple output programmable DC power supply, the output
voltage or current of each channel can be set from 0 to max rated value.
The triple output power supply provides you with high-resolution, high
accuracy and high stability, and supports over voltage, over temperature
protection; Provides a serial or parallel mode, used to extend the voltage or
current output capacity. Resolution reaches up to 1mV/1mA that it can meet
the needs of a variety of applications, and is a great choice for University or R
& D department and the manufacturer. The main features and advantages are
as follows:
 Triple output voltage, all are adjustable.
 CH1 and CH2 can set to serial/parallel/track mode.
 The voltage and current for the three channels can be displayed at the
same time.
 Small size of 1/2 2U
 VFD display
 Function keys with LED light
 Remote measurement function, compensation online pressure drop.
 High accuracy, resolution and stability.
 Switch to control the output status.
 Limited voltage and over heat protection.
 Intelligent fan control, energy conservation, noise reduction.
 IT6300A series instruments have built-in USB/RS232 communication
interface; IT6300B series instruments have built-in USB/GPIB/RS232
communication interface; IT6300C series instruments have built-in
LAN/USB/GPIB communication interface;
 Low ripple and low noise
 Shut off memory function
 Can be monitored by computer software.
 Can calibrate through software.
 Memory capacity of 36 groups, for save and recall.
 Can adjust the voltage or current by knob.
 Can adjust the stepping by Left/right arrow button.
 Output timer function (0.1 ~ 99999.9 seconds)
Model Selection Table for IT6300 Series:
Model
Channel
Voltage
Current
IT6322A
CH1
30V
3A

ITech IT6300 Series Specifications

General

Brand	ITech
Model	IT6300 Series
Category	Power Supply
Language	English