ITech IT6532C User Manual

Function and Features
Copyright© Itech Electronics Co., Ltd. 20
Info: The information of LAN.
LAN Status: Down
IP Mode: Disconnect
IP Addr: 0.0.0.0
SubNet: 0.0.0.0
Gateway: 0.0.0.0
DNS1: 0.0.0.0
DNS2: 0.0.0.0
MAC: 8C:C8:F4:40:01:E1
MDNS Status:
HostName:
HostDesc:
Domain:
TCPIP::INSTR:
Socket Port: 30000
Config:
IP-Mode: Auto/Manual
Server-Config:
MDNS: On/Off
PING: On/Off
telnet-scpi: On/Off
Web: On/Off
VX-11: On/Off
Raw-socket: On/Off
Restore: Restore to factory defaults
Reset: Save all of setting, and the settings take
effect after restart.
CAN
Select CAN communication interface
250K: Baud rate
Addr: address of power supply
Prescaler: Prescaler
BS1 Value: Not settable
BS2 Value: Not settable
ReturnMeter
Enables automatic delay to switch display from setting to
measured value (meter).
Off(Def)
Auto return Meter function disabled.
On
Auto return Meter function enabled
P-Out Power whether power supply was on
Off(Def)
After power on, the instrument will be in the off
state.
Last
If output was on prior to turning the power off,
the ON state will be resumed after power on.
CONFIG
Config menu
Load-Status
Setting the load status.
Load
Off(Def)
Load function is switched off.
On
Internal(Def): internal load function
External: external load function Ext Load Num:
number of external loads.
Static-Curr
Setting the static current when output is Off

ITech IT6532C Specifications

General

Brand	ITech
Model	IT6532C
Category	Power Supply
Language	English