Function and Features
Copyright© Itech Electronics Co., Ltd. 55
E-08 Slow Decrease, Quick Increase of the Supply Voltage
This test simulates the slow decrease of the battery voltage to 0 V and the
sudden reconnection of the battery voltage e.g. by means of applying a jump
start source.
E-09 Reset Behavior
The reset behavior of a component in its environment is simulated and tested.
Test boundary conditions (e.g. assembly, terminal, system) must be described
in detail. During operation, an arbitrary sequence of repeated switching-on/off
procedures occurs; this must not lead to an undefined behavior of the
component. The reset behavior is represented by a voltage variance and a time
variance. Two different test sequences are required to simulate different
switch-off times. A component must always undergo both sequences.
To Next Page
Loading...
Need help?
General
