Functions and Characteristics
Copyright © Itech Electronic Co., Ltd. 13
Solution 2:
Step1. Power on the IT6800 series instrument.
Step2. Press [V-set] key.
Step3. Use the numeric keys 0 to 9 or ▲ and ▼ keys to change the voltage
value.
Step4. Press [Enter] to confirm the value.
For example, the operation steps to set the power supply to 18V are as follows.
1. Press [V-set] key. If the function keys are locked by password, the VFD
displays as follows. If the function keys aren’t locked, you don’t need to
enter the password and the VFD doesn’t display Lock. Directly use the
numeric keys to enter 18 and press [Enter] to confirm.
2. Use the numeric keys to enter the correct password. The VFD displays as
follows and the digits are flashing.
3. Use the numeric keys to enter 18 and press [Enter] to confirm. The VFD
displays as follows. The setting will be finished after two seconds.
3.3 Constant Current Operation
The constant current output range is from 0A to the maximum current value of
each type. It is very easy for you to set the constant current output.
Step1. Power on the IT6800 series instrument.
Step2. Press [I-set] key.
Step3. Use the numeric keys 0 to 9 or use ▲and ▼keys to change the current
value.
Step4. Press [Enter] key to confirm the value.
For example, the operation steps to set the power supply to 2.5A are as follows.
1. Press [I-set] key. If the function keys are locked by password, the VFD
displays as follows. If the function keys aren’t locked, you don’t need to
enter the password and the VFD doesn’t display Lock. Directly use the
numeric keys to enter 2.5 and press [Enter] to confirm.
To Next Page
Loading...
Need help?
General
