19
FOR THE USER
Basic functions - Customer level 1
Heating and hot water settings
Move to the temperature settings for heating on Customer level 1 like this:
1. Press the Menu button in the initial menu.
2. Press the Select button and scroll through the heating menus with the
menu dial.
Move to the temperature settings for hot water on Customer level 1 like this:
1. Turn the menu dial clockwise until you reach the menu Adjusting the hot
water settings.
2. Press the Select button and scroll through the hot water menus with the
menu dial.
Read the temperatures on the heat pump
There are several different temperature sensors in the heat pump. Each
sensor plays an important part in the heat pump's daily operations. It may, for
example, adjust the heating production so that the pump does not become
overheated. Proceed as follows to read the temperatures on the heat pump:
1. Press the Menu button in the initial menu.
2. Turn the menu dial clockwise until you reach the menu Monitor all
temperatures (menu 3).
3. Press the Select button.
4. Turn the menu dial to scroll through all the heat pump’s temperature
sensors.
Note
Each menu is numbered in the lower
right-hand corner; this indicates which
main display it is associated to.
Rego 637 K1
080922 16:08:15 Fr
Heat Info Menu
Main menu
Indoor temperature
settings 1
Return Select
Main menu
Adjusting the hot
water settings 2
Return Select
Main menu
Monitor all
temperatures 3
Return Select
To Next Page
Loading...
Need help?
General
