Ixon IXrouter3 User Manual

14
4.2 LED status indicators
The IXrouter has two LEDs located right above the LAN ports. These show the current status of
the IXrouter's connection. The upper LED indicator ( ) displays the signal status, only
applicable for 4G/Wi-Fi variants, and the lower LED indicator (ACT) shows the activity status.
The table below provides an overview of all possible LED status indications.
Signal LED
Blinking blue
Initializing cellular module
Blinking red 1 pulse
No reception or unable to connect to network
(APN or SSID may be incorrect)
Blinking red 2 pulses
PIN invalid or PUK required
(a phone is required to unlock SIM card with PUK)
Blinking red 4 pulses
SIM card is invalid or missing
Constant red
Connected, poor reception
Constant purple
Connected, medium reception
Constant blue
Connected, good reception
ACT Activity LED
Constant red
Booting up (may take 1-2 min) or not yet
registered
Blinking red 1 pulse
Waiting for internet access
Blinking red 3 pulses
LAN/WAN conflict
(conflicting subnets)
Blinking red 4 pulses
Removed from the platform
(re-insert USB flash drive to register again)
Blinking red 5 pulses
Previously registered to the IXON Cloud
(remove from the IXON Cloud and register again)
Blinking blue 1 pulse
Connecting to the IXON Cloud
Blinking blue 2 pulse
Setting up a VPN connection
Constant blue
Active VPN connection to the IXON Cloud
More info
For a list of most common causes and troubleshooting tips we recommend viewing our online article
https://support.ixon.cloud/hc/articles/360002302011.

Ixon IXrouter3 Specifications

General

Brand	Ixon
Model	IXrouter3
Category	Network Router
Language	English