Jacobsen ECLIPSE 360 User Manual

B
CONTROLS
en-21
Safety, Operation, & Maintenance Manual
Lithium
Light Switch (G)
Controls operation of the work lights. Press front of switch to turn lights ON. Press rear of switch to turn lights OFF.
Switch is not active if system power switch is not in RUN position.
System Power Switch (H)
Used to energize the electrical system and start the hybrid engine if installed. Power switch has three positions, OFF,
RUN, and START.
• OFF Position - Power to mower is turned off.
• RUN Position - Controllers active, normal operating mode. Traction controller does not activate until switch is moved
to START position and returned to RUN.
• START Position - Used to activate the mow and traction system and start the hybrid engine if installed. See Starting
on page 47
Parking Brake Switch (I)
Used to engage the electric motor brake. Rock the switch forward to engage the parking brake. Rock the switch rearward
to release the parking brake.
Reel Raise/Lower Joystick (J)
Used to raise and lower the three reels. Lift system operates in two modes, service mode and mow mode. Individual
reels will not lower if the corresponding reel switch is in the OFF position. See Lift System on page 43 for lift system
operation.
Fig. 1
4
8
V
1
2
V
!
Electric
Gas/Diesel
B
C
D
E
F
G
G
H
H
J
I

Jacobsen ECLIPSE 360 Specifications

General

Brand	Jacobsen
Model	ECLIPSE 360
Category	Lawn Mower
Language	English