B
en-48
Safety, Operation, & Maintenance Manual
OPERATION
Lithium
Fig. 1
STOPPING / PARKING ________________________________________________
To stop:
Remove your foot from traction pedal, regen braking will start, bringing the mower to a complete stop. When mower
stops, move the parking brake switch to the ON position. The parking brake will engage and the parking brake light on the
LDU will turn on.
To park the mower under normal conditions:
1. Disengage the mow switch, raise the implements, and move away from the area of operation.
2. Select a flat and level area to park.
• Release traction pedal to bring the mower to a complete stop.
• Move the parking brake switch to the ON position The parking brake light should come on.
• Disengage all drives, lower reels to the ground.
3. Turn system power switch to OFF position, and always remove key.
If an emergency arises and the mower must be parked in the area of operation, follow the guidelines outlined by the
grounds superintendent. If the mower is parked on an incline, chock or block the wheels.
To Next Page
Loading...
Need help?
General
