45
J-400
= Treble Adjustment: Slide from side to side to adjust
the Treble range from -5 to 5. This feature can be
used to create a custom sound.
= Rock Preset: Tap to activate the “Rock” music audio
setting. “Rock” has a 1 Bass and 3 Treble preset setting.
When not in use it will be grayed out; if it is in use the button
will be highlighted, Figure 11.6b.
= Pop Preset: Tap to activate the “Pop” music audio setting.
“Pop” has a -1 Bass and -2 Treble preset setting. When not
in use it will be grayed out; if it is in use the button will be
highlighted, Figure 11.6b.
= Classical Preset: Tap to activate the “Classical” music
audio setting. “Classical” has a 1 Bass and 1 Treble preset
setting. When not in use it will be grayed out; if it is in use
the button will be highlighted, Figure 11.6b.
= Back Button: Tap to go back to the previous menu.
= Invert Button: Tap to invert the display image.
11.7 CLEARRAY on Demand
The CLEARRAY on demand feature activates the water purication
system. Continuously tap to activate the system for 1 hour, 2 hours,
3 hours or OFF. During this time the circulation pump and the
CLEARRAY unit are on.
Note: When the CLEARRAY system is on due to a programmed or
scheduled setting the feature cannot be turned off.
11.8 Adjusting Jet Flow
The water ow to certain jets in your spa can be increased or
decreased by rotating the outside jet face.
Note: Always keep at least 6 adjustable jets open at all times.
11.9 Adjusting PowerPro™ MX2 Jets
Tilt PowerPro MX2 Jet nozzle to angle of choice as desired.
Rotate nozzle clockwise to reduce ow volume from jet or
rotate counterclockwise to increase ow volume.
Note: Always keep at least 6 adjustable jets open at all times.
11.10 Adjusting RX Jets
Rotate the outside jet face clockwise to decrease or shut off
water ow. Turn counterclockwise to turn on or increase water ow.
Note: Always keep at least 6 adjustable jets open at all times.
Treble
rock
pop
To Next Page
Loading...
Need help?
General
