48
J-400
3. Status:
• Cyan light - breathing (slow pulsing) indicates the status is good.
• Cyan light - ashing indicates that the system is completing a
connection to the cloud.
• Green light - ashing indicates waiting for a connection to the
cellular tower.
• Dark blue light - ashing indicates a SIM error.
4. Cell signal strength:
• 3 blue LED lights indicates cell signal strength.
C. Resetting the SmartTub™ controller
Should the SmartTub™ controller need to be reset, hold the magnet
(located on the cord) to the reset label on the side of the SmartTub
device.
12.0 Programming and Operation Instructions
Your Jacuzzi spa is equipped with setting menus that allow you to pro-
gram and activate different components of the spa. With our ProTouch
control panel, programming your spa has never been easier. In the sec-
tions that follow, we will guide you through the process of programming
the spa to t your personal comfort. Tap to enter the Settings Menu.
100
6:45p
Heat & Filter
Water Care
Units
SETTINGS
= Heat and Filter: Provides access to the heating and
ltration programming, page 49.
Water Care
= Water Care: Provides access to the water care
programming, page 52.
= Wi-Fi: Provides access to the Wi-Fi programming, page
55. Not applicable if the optional SmartTub™ system
is installed.
Lock
= Lock: Provides access to the spa lock programming,
page 56.
= Time and Date: Provides access to the time and date
programming, page 57.
Figure 12.0b
Figure 12.0a
To Next Page
Loading...
Need help?
General
