Page 49
J-400
= Pop Preset: Tap to activate the “Pop” music audio setting.
“Pop” has a -1 Bass and -2 Treble preset setting. When not
in use it will be grayed out; if it is in use the button will be
highlighted, Figure 11.6b.
= Classical Preset: Tap to activate the “Classical” music
audio setting. “Classical” has a 1 Bass and 1 Treble preset
setting. When not in use it will be grayed out; if it is in use
the button will be highlighted, Figure 11.6b.
= Back Button: Tap to go back to the previous menu.
= Invert Button: Tap to invert the display image.
11.7 CLEARRAY on Demand
The CLEARRAY on demand feature activates the water purication
system for a period of 1-hour. Tap to turn the system on. During this
time the circulation pump and the CLEARRAY unit are on. The button will
have a blue inner glow when this feature is on.
Note: When the CLEARRAY system is on due to a programmed or
scheduled setting the feature cannot be turned off.
11.8 Adjusting Jet Flow
The water ow to certain jets in your spa can be increased or
decreased by rotating the outside jet face.
Note: Always keep at least 6 adjustable jets open at all times.
11.9 Adjusting PowerPro™ MX2 Jets
Tilt PowerPro MX2 Jet nozzle to angle of choice as desired.
Rotate nozzle clockwise to reduce ow volume from jet or
rotate counterclockwise to increase ow volume.
Note: Always keep at least 6 adjustable jets open at all times.
11.10 Adjusting RX Jets
Rotate the outside jet face clockwise to decrease or shut off
water ow. Turn counterclockwise to turn on or increase water ow.
Note: Always keep at least 6 adjustable jets open at all times.
11.11 WaterColour™ Waterfall Control
Turn waterfall control valve (pages 23-40) counterclockwise
to increase waterfall output. Turn control valve clockwise to
decrease or turn off waterfalls.
Note: When the waterfall is in the OFF position, some water may still
ow through. This is considered normal.
pop
To Next Page
Loading...
Need help?
General
