Page 71
J-400
WARNING: RISK OF PERSONAL INJURY, DROWNING
OR ENTRAPMENT!
Never leave your hot tub unattended for any reason while the
cover is open and accessible, especially to small children and
animals!
CAUTION: RISK OF PERSONAL INJURY OR SPA DAMAGE!
Never add chlorine tablets (trichlor) or acid to your hot tub for
any reason! These chemicals may damage components within
your hot tub, burn or irritate your skin, create a rash and void
the manufacturer warranty for your spa.
!
14.3 Other Additives
Many other additives are available for your spa. Some are necessary
to compensate for out-of-balance water, some aid in cosmetic water
treatment and others simply alter the feel or smell of the water. With our
chemical products your authorized Jacuzzi dealer can advise you on the
use of these additives. Jacuzzi chemicals are for use in the U.S. only.
14.4 CLEARRAY® (Ultraviolet) Water Purification System
CLEARRAY Water Purication System is exclusive
technology utilizing natural ultraviolet technology to
eliminate waterborne bacteria, viruses, and algae in
portable spas. The ultraviolet light otherwise known as
UV-C or germicidal light inactivates the microorganisms
disrupting the DNA so that it cannot reproduce and is
considered lifeless. CLEARRAY is plumbed in-line with
your ltration system. After the water is drawn from the
pump, lter, and heater it is then directed though the CLEARRAY system.
Water passes through an ultraviolet light energy that treats and disinfects
the water. The water is then pumped back into the spa giving you crystal
clear water instantly. The system has a ballast that is the power supply
for the purication system (Figure 14.4a); it has two LED indicator lights
The “Power On” (red color) indicating incoming power ow and the
“Lamp on” (green color) indicating the system is properly working.
CLEARRAY is standard for all models.
After a year the bulb must be replaced. If the CLEARRAY timer has
been programmed correctly a message will appear on the LCD display
when the time allotted has expired. In order to clear the message, a new
CLEARRAY UV bulb needs to be installed and the timer must be reset,
page 54.
To Next Page
Loading...
Need help?
General
