30
VTX A8 | User Manual
12 - LINE ARRAY CONTROL PANEL
12.1 - ACCESSING LACP
LACP filters can be modeled in JBL’s Line Array Calculator and then imported into JBL’s Performance Manager for application to actual
devices. To access LACP within the Line Array Calculator, first create circuit groups by using the included grouping feature. The created
groups should represent the actual array amplification. This will allow for realistic and accurate DSP adjustments. After creating the
circuit groups, click on the LACP button under the DSP column. Global filters, like Filter 1 and 2, are automatically applied to all circuit
groups in the array.
The JBL Line Array Control Panel (LACP) was designed to tailor
the tonal balance of a line array using the five included, adjustable
DSP filters. Each filter serves a specific, intended purpose and
accelerates the tuning process. Two of these filters are grouped
across the entire array (global adjustments), and three filters are
designated for circuit-specific adjustments. LACP parameters
can be modeled using the JBL Line Array Calculator and then
applied in real time using the JBL Performance Manager control
software.
To Next Page
Loading...
Need help?
General
