Operation
Operating Levers/Pedals
92 92
9811/9950-1
Auxiliary Operation
!MWARNING
Before operating the Auxiliary control system make
sure that you are aware of all WARNINGS and
CAUTIONS that apply to the attachment you are using.
Also make sure you have fitted the attachment
correctly. (See OPTIONAL ATTACHMENT section).
5-2-2-6
!MWARNING
Ensure that the swing/auxiliary switch is set to the
desired position before operating the swing/auxiliary
pedal.
8-2-9-39
Make sure that the swing/auxiliary switch C is selected to
auxiliary position. K Fig 43. ( T 93).
Press the swing/auxiliary pedal D to the left A or right B
depending on the attachment fitted and the function
required.
Note: Every time the swing/auxiliary switch C is operated
the respective swing/auxiliary indicator will illuminate.
Important: The swing/auxiliary switch C will always
default to the swing position whenever the starter switch is
turned from the 'O' position to the 'I' position.
Fig 42. Auxiliary indicator illuminated.
AUX
To Next Page
Loading...
Need help?
General
