Operation
Drive Controls, Switches and Instruments
66 66
9811/9950-1
Drive Controls, Switches and Instruments
Drive Controls
Track Controls
P11-2021
The two tracks are controlled by a pair of control levers A
in front of the seat. Each lever controls one track and is
spring loaded to a central position. In this position the track
does not operate. The left side lever controls the left track.
The right side lever controls the right track. The two levers
can be operated individually or together as necessary to
move the machine as required. This can be done using
one hand or both.
The track controls operate as described when the
excavator is positioned about the dozer B. If the excavator
is at the opposite end to the dozer, the lever operation will
be reversed. Always travel the machine with the excavator
positioned at the same end as the dozer, especially on
hard and rocky ground.
731911-4
Fig 21.
To Next Page
Loading...
Need help?
General
