Operation
Starting the Engine
110 110
9811/9950-1
To Remove the Program from a Starter Key
1 Put the master key in the starter switch then turn the
starter switch to position I. The LED will flash 3 times.
2 Keep the starter switch in position I for 60 seconds,
the LED will flash 5 times.
The starter key codes have now been deleted from
the ECU.
3 Turn the starter switch to position 0 then remove the
starter key.
Important: The starter keys will still be able to be used on
any other machine on which they have been programmed.
To Next Page
Loading...
Need help?
General
