jcb JCB-MS-254SB-L User Manual

13
JCB-MS-254SB-L
Instruction & User Manual
VIBRATION AND NOISE INFORMATION
Total noise values determined in accordance with IEC 62841
A-Weighted Sound Pressure (L
pA
)
94.3 dB(A)
Uncertainty K
pA
3 dB
A-Weighted Sound Level (L
wA
)
107.3 dB(A)
Uncertainty K
wA
3 dB
Wear ear protection when sound pressure is over 80 dB(A)
Wear hearing protection.
The effects of noise can cause a loss of
hearing. The above-mentioned noise emission
values were measured in accordance with a
standardised test procedure and can be used to
compare one power tool with another.
The above-mentioned noise emission values
can also be used for the preliminary assessment
of exposure.
Warning:
The noise emissions during the actual use of
the power tool may differ from the above-
mentioned values depending on the power
tool being used, in particular on the type
of workpiece being processed. Try to keep
emissions as low as possible, for example by
limiting your working time. In this regard, all
the operational cycle phases must be taken into
consideration (such as the times when the tool
is switched off or running idle).
WARNING!

jcb JCB-MS-254SB-L Specifications

General

Brand	jcb
Model	JCB-MS-254SB-L
Category	Saw
Language	English