60 - 1
Introduction
The valve is used to control the application and release of the slew brake at either 50% or 100% pressure. The valve is
operated by pilot pressure selected by the operator’s control lever.
Specification
JS130
Working pressure 40 kgf//cm
2
(569 lbf/in
2
)
Rated flow 16 l/min (3.52 gal/min)
Pressure reducing valve setting 12.5 kgf/cm
2
(177.7 lbf/in
2
)
Oil temperature range TBA
Weight TBA
Voltage 24 V DC
Power rating 12 W
JS160
Working pressure 40 kgf//cm
2
(569 lbf/in
2
)
Rated flow 5 l/min (1.1 gal/min)
Pressure reducing valve setting 16 kgf/cm
2
(228 lbf/in
2
)
Oil temperature range 20 °C ~ + 95 °C (-4.4 °F ~+ 203 °F)
Weight 4.3 kg (9.5 lb)
Voltage 24 V DC
Power rating 14.5 W
Section E Hydraulics
9803/6410
Section E
60 - 1
Issue 1
Slew Brake Valve
+ 0
- 1
+ 0
- 14.2
To Next Page
Loading...
Need help?
General
