Jensen VM9324 User Manual

27
VM9324
Direct Tuning
To enter a radio station directly, touch the button or press the GOTO button
(21) on the remote control to display the direct entry menu.
Enter the desired radio station using the on-screen number pad. Press the
arrow (enter) button to tune to the selected station. To exit the screen without
changing the station, touch Exit. To clear your entry and start over, touch
Clear.
Using Preset Stations
Eighteen numbered preset buttons store and recall stations for the AM and FM
band. All eighteen stored stations (P1-P18) for the current band appear on the
screen for immediate recall.
Storing a Station
1. Select a band (if needed), then select a station.
2. Touch the on-screen MEM button (24) on page 2/2 to open the preset
screen.
3. Touch to enter the preset number in which you would like to store the
current station (or touch Exit to cancel and close the menu). The preset
number and station appears highlighted in the list.
1
2
3
4
5
6
7
8
9
0
C
Exit
FM . MHz
1
2
3
4
5
6
7
8
9
0
C
Exit
Preset:P

Jensen VM9324 Specifications

General

Brand	Jensen
Model	VM9324
Category	Car Receiver
Language	English