54
VM9324
iPod OPERATION
NOTE: Be sure your iPod has the latest Apple firmware installed to avoid
connectivity issues.
Accessing iPod Mode
This unit is Made for iPod and works with iPhone. You can control your iPod
via touch screen to access Playlist, Artist, Album, Songs, etc. Supported
models include, but are not limited to, the following:
• iPod Classic
• iPod Touch 2G / 3G
• iPod Nano 3G / 4G / 5G
• iPhone 3G / 3GS
The unit will automatically switch to iPod mode when an iPod or iPhone is
plugged into the front USB connector.
NOTE: For basic iPod connectivity, you can use the white 30-pin to USB
iPod cable that came with your Apple device. For iPod video or photo
playback, you must purchase the jLink-USB cable.
To return to the iPod menu from any other source menu, press the SRC button
(2) on the front panel or remote control (8) until the iPod menu appears on the
screen. The on-screen indicators and touch key areas for iPod playback are
outlined below.
1. Elapsed playing time/total playback time
To Next Page
Loading...
Need help?
General
