Page 11 | EN
|
E-Sub
EN
Unpack this box close to where the
subwoofer will be placed. The subwoofer
is PACKED upside down. This box must be
flipped over CAREFULLY to remove the
subwoofer and minimize effort.
UNPACKING YOUR E-SUB
Now that you have determined your E-Sub’s position on the floor of your room,
you can proceed with unpacking it near its intended location.
C
D
A
B
IMPORTANT
IMPORTANT
IMPORTANT! DUE TO THE WEIGHT OF THE E-SUB SUBWOOFER, PLEASE
EXERCISE CAUTION WHILE UNPACKING AND POSITIONING IT TO PREVENT
INJURY. IF POSSIBLE, ENLIST THE HELP OF A SECOND PERSON TO FACILITATE
THE PROCESS. TO MINIMIZE THE RISK OF INJURY, BEND YOUR KNEES AND LIFT
WITH YOUR LEGS, NOT YOUR BACK.
Detailed instructions on unpacking the subwoofer:
1. Place the carton on the floor near its intended location in the room.
2. Open the top of the carton (observe markings on carton)
and remove the manual and power cord.
3. The subwoofer is packed upside-down. Lift the
styrofoam cap off the bottom of the subwoofer.
4. Loosen the protective cloth cover to make later removal easier
(do not remove at this time). When you open the cloth cover,
you are looking at the bottom of the subwoofer cabinet.
5. Replace the styrofoam cap you removed in Step 3 to protect the subwoofer’s
cabinet while flipping and unpacking the subwoofer in the following steps.
6. Gently flip the box on its side, folding back the carton flaps to the outside.
7. Holding the carton flaps back, gently flip the carton onto its top (open end).
8. Pull the carton straight up until it clears the subwoofer and place to one side.
9. Remove the top-most styrofoam cap and place this cap in the carton.
10. Remove the plastic bag and place in the carton.
11. Lift the subwoofer off the remaining styrofoam
cap and place this cap in the carton.
12. Remove the protective cloth cover and place in the carton.
IMPORTANT! PLEASE RETAIN ALL PACKAGING FOR SAFE TRANSPORTATION
OF THE SUBWOOFER AND FOR ANY FUTURE SERVICE NEEDS.
To Next Page
Loading...
Need help?
General
