JR PCM9X II Instruction Manual

19 General Section
Model Reset
Model Reset is used to return the program to the
factory default settings.
1. In the SYSTEM Menu, highlight and select MDL
Reset using the Selector.
2. Press the CLR button that is next to RES on the
display.
3. Press the lowermost button next to YES on the
display to reset all data for this model.
4. Return to the SYSTEM Menu by pressing the LIST
button.
Modulation
The PCM9X II system supports three types of
modulation – ZPCM, SPCM and PPM (FM). The correct
modulation type must be selected to match the receiver
in the aircraft or the system will not function.
1. In the SYSTEM Menu, highlight and select
MODULAT. using the Selector.
2. Highlight and select either ZPCM or SPCM or PPM
to match the receiver in the aircraft.
3. Return to the SYSTEM Menu by pressing the LIST
button.

JR PCM9X II Specifications

General

Brand	JR
Model	PCM9X II
Category	Receiver
Language	English