JUKI DDL-8700B-7 User Manual

– 18 –
1) Press the power switch ❶ to turn the power ON.
The power switch ❶ is in the ON state when the
"I" mark side is pressed. It is in the OFF state
when the "○" side is pressed.
If the power indicator LED on the panel
does not light up after having turned ON
the power switch ❶, immediately turn
OFF the power switch ❶ and check the
supply voltage.
In addition, in such a case as this, re-turn
ON the power switch ❶ when 2 to 3 min-
utes or more have passed after turning
OFF the power switch.
2) When the power switch ❶ is turned ON, the
sewing machine automatically turns to bring the
needle bar to its UP position in the case the nee-
dle bar is not in that position.
When turning ON the power, the needle
bar moves. Do not put your hands or
things under the needle.
3) The pedal is operated in the following four steps:
a. The machine runs at low sewing speed when you
lightly depress the front part of the pedal. ❷
III. FOR THE OPERATOR
1. Operating procedure of the sewing machine
5) When one-touch type reverse feed switch ❻ is
pressed, the sewing machine performs reverse
feed stitching.
4) Reverse feed stitching at the beginning of sewing,
reverse feed stitching at the end of sewing and
various sewing patterns can be set on built-in panel
❺ of the machine head.
b. The machine runs at high sewing speed when you further depress the front part of the pedal. ❷
(If the automatic reverse feed stitching has been preset, the machine runs at high speed after it completes
reverse feed stitching.)
c. The machine stops (with its needle up or down) when you reset the pedal to its original position.
d. The machine trims threads when you fully depress the back part of the pedal. ❹
* When the auto-lifer (AK device) is used, one more operating switch is provided between the sewing ma-
chine stop switch and thread trimming switch. The presser foot goes up when you lightly depress the back
part of the pedal ❸, and if you further depress the back part ❹, the thread trimmer is actuated.
6) When you have nished sewing, conrm rst that the sewing machine has stopped. Then, press the pow-
er switch ❶ to turn the power OFF.
In the case the machine is not used for a long time, remove the power plug from the plug recep-
tacle.
❻
❸
❷
❹
1
4
2
0
3
❶
❺

JUKI DDL-8700B-7 Specifications

General

Brand	JUKI
Model	DDL-8700B-7
Category	Sewing Machine
Language	English