– 24 –
❾
❾
'
❾
⇩
6. Setting of functions
Set value for the function setting can be changed.
1) Turn the power ON while keeping switch
held pressed.
The indication on the display section is changed
to "n. ".
The numeric character displayed on the right side
of "n." represents the function setting number.
(The gure shows the case of "No. 96 Maximum
sewing speed".)
2) Press and switches ❾ to change the
number of function setting.
and switches ❾' (two switches on
the left) are used for changing the number
in the "fast-feed" mode.
3) Press switch to change the setting.
The indication is changed to the set value.
(The gure shows the case where the set value is
changed from the indication "n.96" to "4000" (set
value) by pressing switch .)
4) Press and switches ❾ to change the set
value.
5) Press switch to conrm the set value.
6) The display returns to the state described in 1).
To additionally change the set value for other
function setting numbers, repeat the steps of
procedure from 2).
When you have completed the set value
changing, press switch . The sewing
machine is restored to its normal sewing state.
To Next Page
Need help?
General
