– 26 –
Ⓒ
Ⓐ
Ⓑ
Ⓓ
Ⓖ
[Bobbin thread counting function]
1) Operate this function in the state where sewing is
nished.
The value on the counter cannot be changed if
thread trimming has not been carried out.
2) The value on the counter is reset to the initial
value by pressing switch .
3) In this state, the initial value can be changed by
pressing and switches ❾.
[Number of stitches counting function]
1) The number of stitches is automatically counted
from the start of sewing until thread trimming is
carried out.
2) Once thread trimming is carried out, the value on
the counter is reset to 0 (zero).
Ⓒ
Ⓐ
Ⓑ
Ⓓ
Ⓕ
❾
To Next Page
Loading...
Need help?
General
