viii
PRECAUTIONS TO BE TAKEN SO AS TO USE THE DDL-9000C
SERIES MORE SAFELY
1. To avoid personal injury, never put your ngers under the needle when you turn ON the
power switch or operate the sewing machine.
2. To avoid personal injury, never put your ngers into the thread take-up cover while the sew-
ing machine is in operation.
3. To avoid personal injury, turn OFF the power switch when you tilt the machine head.
4. To prevent possible personal injury caused by being caught in the machine, keep your n-
gers, head and clothes away from the handwheel and the thread take-up while the sewing
machine is in operation. In addition, place nothing around it.
5. To avoid personal injury, never operate the sewing machine with the nger guard removed.
6. To avoid personal injury, be careful not to allow your ngers in the machine when tilting the
machine head.
7. Be sure to mount the machine head support bar on the machine table so that its height
from the table surface becomes 63 to 68 mm. For the sewing machine provided with the
AK device, be sure to mount the support bar on the table so that its height from the table
surface becomes 33 to 38 mm.
1. For the safety, never operate the sewing machine with the ground wire for the power supply
removed.
2. Be sure to turn OFF the power switch in prior when connecting/disconnecting the power
plug.
3. When thunders occurs, stop the work for the safety and disconnect the power plug.
4. When the sewing machine is suddenly moved from a cold place to a warm place, there is a
case where dew condensation may occur. Turn ON the power after there is no worry of the
drop of water.
5. To prevent res, periodically draw out the power plug from the plug socket and clean the
root of the pins and the space between pins.
6. The hook rotates at a high speed while the machine is in operation. To prevent possible
injury to hands, be sure to keep your hands away from the vicinity of the hook during oper-
ation. In addition, be sure to turn OFF the power to the machine when replacing the bobbin.
7. The motor does not produce noise while the machine is at rest.
To avoid possible accidents due to abrupt start of the machine, be sure to turn OFF the
power to the machine.
8. Be careful of handling this product so as not to pour water or oil, shock by dropping, and
the like since this product is a precision instrument.
9. When tilting the sewing machine, secure the section marked with the down-pointing arrow
(
⇩
) to prevent the table from shifting.
10. When tilting or raising the sewing machine, hold the upper section of sewing machine with
both hands and carefully tilt/raise the sewing machine while taking care not to allow your
ngers and other parts of your body to be caught under the machine.
* When tilting/raising the sewing machine, neither push the operation panel nor put hands
on it.
⇩
To Next Page
Loading...
Need help?
General
