– 28 –
Replacing the blind seal
1. Remove two setscrews
❷
and
❸
from LED cover
❶
. Then, the
LED cover can be lowered.
2. Rip off the stained blind seal. Put new blind seal
❹
in place.
❶
❷
❹
❸
CAUTION
Turn OFF the power switch.
Always must be disconnected plug from socket-outlet.
Maintenance
Turn OFF the power switch. Remove the needle.
Loosen the screws to remove the throat plate.
Then clean up the hook components using a cleaning brush.
Maintenance and lubrication
CAUTION
Always must be disconnected plug from socket-outlet before cleaning or lubricating the sewing machine.
Cleaning the hook
To Next Page
Loading...
Need help?
General
