25
WARNING :
In order to protect against personal injury due to unexpected start of the sewing machine, never
bring hands near the needle entry area or place foot on the pedal during the adjustment of intensity
of the LED.
This LED is intended to improve opera-
bility of the sewing machine and is not
intended for maintenance.
If the LED light is too bright when sewing
a narrow sewing material or changing
over the sewing material on the sewing
machine, the LED light should be dimmed
or turned OFF.
The sewing machine is provided as standard with an
LED light which illuminates the needle entry area.
Intensity adjustment and turn-off of the light is carried
out by pressing switch
. Every time the switch is
pressed, the light is adjusted in intensity in ve steps
and is turned off in turn.
[Change of intensity]
1
⇒
...... 5
⇒
6
⇒
1
Bright
⇒
...... Dim
⇒
Off
⇒
Bright
In this way, every time the switch
is pressed, the
hand lamp status is changed in repetition.
5-9. LED hand light
To Next Page
Loading...
Need help?
General
