35
(2) Completion of counting
1) Selection of kinds of counters
Press ITEM SELECT key
to display the
pictograph
E
which indicates the counter type in
reverse video.
Press DATA CHANGE key
, and select
the counter you desire from among the kinds of
counters below.
2) Changing the set value for the bobbin thread
counter
Press ITEM SELECT key
to display the
set value
G
for the bobbin thread counter in the
reverse video.
Enter the set value to be counted until this value
is reached by pressing DATA CHANGE key
.
(1) How to set the bobbin thread counter
[Bobbin thread counter]
3) Changing the current value of the bobbin thread counter
Press ITEM SELECT key
to display the current value
F
of the counter in reverse video.
In addition, It is possible to edit the numeric value by DATA CHANGE key
.
E F G
G
The count completion screen has been factory-set to "disabled" at the time of shipment.
In order to use the count-completion screen for the sewing counter, set the memory switch U077 to "Enable
display".
(Refer to
"I.8-2. List of the memory switch functions" p.59
.)
To Next Page
Loading...
Need help?
General
