JUKI LU-2210N-7 User Manual

0 I LU-22XXH-7
ui}
10. PEDAL OPERATION
High speed
Low speed
Stop
Presser foot lifter
Thread trimmer
• Cleaning the filter
1) Approximately once a month, re
move
screws O from the filter case
and clean magnet O and filter
element O inside the filter.
2) if the filter is clogged with soil, circu
lation failure will result. This willgive
rise to oil
leakage from the upper por
tion of
the hook driving shaft saddle.
High speed
Low speed
©
©
Stop (neutral)
Presser foot lifter
Thread trimmer
The pedal is operated in 5 stages.
1. Lightly depress the front part ofthe pedal, and the sewing machine will runat low speed.
2. Furtherdepress the
front part ofthe pedal, and the machine will runat highspeed.
3. Return the pedal tothe state in which you lightly place your foot onthe pedal, andthe sewing machine stops. (The machine stops
with its needle down or up.)
4. Lightly depress the back part ofthe pedal, and the presser foot will go up.
5. Further depress the back part ofthe pedal, andthe presser foot will come down, the thread trimmer will actuate andthe machine will
stop with its needle up.
o You candepressthe backpartofthe pedal directly from the high-speed position or low-speed position toactuatethethread trimmer.
o You can bring the pedal back tothe neutral position immediately after you have confirmed the start ofa thread trimming action. The
machine will stop after the completionof the thread trimming action.
o If you want to raise the needle after the machine has stopped with its needle down, make the thread trimmer actuate once or turn the
handwheel by hand.
-8-
From the library of: Superior Sewing Machine & Supply LLC

JUKI LU-2210N-7 Specifications

General

Brand	JUKI
Model	LU-2210N-7
Category	Sewing Machine
Language	English