JUKI LU-2210N-7 User Manual

2. INSTALLING THE WASTE OIL CONTAINER
O
Oil pan
e
3. INSTALLING THE SYNCHRONIZER
1) Attach drain plug O, oil seal @ and washer O tothe oil pan.
Attach packing 0 and washer O to screw O and fix them
with nut O.
2) After they are fixed, screw in waste oil container O into drain
plug O.
WARNING:
Turn OFF the power before starting the work soasto prevent accidents caused by abrupt startofthe sewing machine.
0
O
1) Attach synchronizer support rod O to the arm using attaching nut 0.
2) Attach synchronizer 0 in place with screws 0 so that marker line 0 engraved on the synchronizer aligns with projecting
portion O ofthe handwheel.
4. ATTACHING THE BELT COVER
A
WARNING:
Turn OFF the power before starting the work soasto prevent accidents caused by abrupt start of the sewing machine.
Notch (upper)
Notch (lower)
1) Fix belt cover (rear) O on the arm with screws 0.
2) Fit belt cover (front) 0 to notch (upper) O and notch (lower)
0 of the belt cover (rear).
3) Fix belt cover (front) 0 with screws O and 0.
-2-
From the library of: Superior Sewing Machine & Supply LLC

JUKI LU-2210N-7 Specifications

General

Brand	JUKI
Model	LU-2210N-7
Category	Sewing Machine
Language	English