122
* The position of reverse feed switch 4 and mirror
switch 2 can be reversed.
When changing the position of the switch in case of
“A. In case of the machine with the auxiliary thread
take-up lever”, refer to the items 3) through 5).
(Note) Freely adjust the height of the respective
switches.
5
2
4
6
1
3
1
4
Part No.
MAM09700BA0
SS5110710SP
22591564
10061554
10064004
Description
Upturn folder for fagoting (asm.)
Setscrew for the above folder
Presser (asm.)
Throat plate (asm.)
Feed dog
Q’ty
1
2
1
1
1
1
2
3
4
5
2
5
7-4. Pattern 2 (fagoting) sewing
When performing the fagoting sewing, use the optional gauge for fagoting below.
[Example of installing optional gauge for fagoting]
* For the details of setting procedure of the patterns, see p.65.
1. Gauges used with LZ-2285N, 2285
and 1285 can be used.
2. When using the optional gauge
for fagoting, the wiper device can
not be used.
3. When performing fagoting
sewing using optional fagoting
gauge, set presser 3 so that the
pressure of right and left soles of
the presser is equal and perform
micro lifting by approximately a
sheet of paper. Then the slippage
of right- and left-hand side
materials can be prevented.
For the micro-lifting mechanism
of the presser foot, refer to P.125.
Cau
tion
Downturn folder type for fagoting
(asm.) can be supplied as well.
Part No. : MAM097000A0
Reference
1
To Next Page
Loading...
Need help?
General
