123
2
1
1) Reverse feed switch 1
Press reverse feed switch 1 and reverse feed is
performed.
When it is released, normal feed is performed.
2) Mirror switch 2
When scallop, custom pattern or continuous
stitching is selected, the switch becomes a mirror
switch.
Mirror inversion means the function that the reverse pattern sewing is performed after pressing the mirror
inversion switch during temporary stop of sewing.
(For the details, refer to the mirror function setting, p.98.4)
For the adjustment of the height, see p.121.
■ Sewing procedure (Example : scallop)
1) Stop the sewing machine at the position you desire to perform mirror inversion during sewing.
2) Press the mirror inversion switch. When the mirror inversion switch is received, LED lights up. (The
switch can receive only when the sewing machine stops and dose not receive when the sewing machine
is running.)
3) Perform mirror inversion sewing with the sewing machine.
4) Perform thread trimming or press again the mirror inversion switch to complete the inversion sewing.
Sewing direction
Scallop 1
pattern
Stop the sewing machine
and press mirror
inversion switch.
Pattern during
sewing
Afterwards inversion
operation
Mirror inversion operation
LED lights up.
7-5.Hand switch
To Next Page
Loading...
Need help?
General
