FOR
SAFE OPERATION
-
I
1.
To avoid electrical
shock
hazards, neither open the cover of the electrical box for the
inotor nor touch the components mounted inside the electrical box.
.
-.
.
-
..
-.
.
__
_-
..p--._-.-_
_
1.
To
avoid
personal
injury, never operate the machine with any of the belt cover, finger
guard, eye protection cover or safety devices removed.
1
2.
To prevent possibie personal injuries caused by being caught in the machine, keep
A,
your fingers, head and clothes away from the handwheel,
V
belt and the motor while
the machine is operation. In addition, place nothing around them.
i
3.
To avoid personal injury, never put your hand under the needle when you turn
"ON"
the power switch or operate the machine.
4.
To avoid possible personal injuries, be careful not to allow your fingers in the machine
when
tilingjraising the machine head.
5.
To avoid possible accidents because of abrupt start of the machine, turn
OFF
the power
to the machine when tilting the machine head or removing the belt cover and the
V
belt.
6.
If your machine is equipped with a servo-motor, the motor does not produce noise
while the machine is at rest. To avoid possible accidents due to abrupt start of the
machine, be sure to turn
OFF
the power to the machine.
7.
To avoid electrical shock hazards, never operate the sewing machine with the ground
wire for the power supply removed.
8.
To prevent possible accidents because of electric shock or damaged electrical
component(s), turn
OFF
the power switch in prior to the
connection/disconnection
of
the power plug.
To Next Page
Loading...
Need help?
General
