Preparing machine
1
2
3
A
B
C
Attaching the foot controller
1. Plug foot controller into machine socket.
2. Plug foot controller into power supply socket.
3. Lay your foot on the foot controller.
Step on the foot controller strongly (deeply), and the sewing
speed increases.
Step on the foot controller lightly (shallowly), and the sewing
speed decreases.
On/O of the power/light switch
A Pressing turns the power switch off.
B Pressing turns the power switch on, and sewing operation is per-
formable. The sewing light remains off.
C Pressing turns on both the power switch and sewing light.
MO-654DEN
MO-644DN
On/O of the power/light switch
The power/light switch is conveniently placed on the handwheel side
of the machine in front of the socket.
= Off
= On with light
CAUTION :
Perform these following steps when you are not using your
sewing machine:
1. Be sure to turn OFF the power switch.
2. Be sure to remove the power plug from the wall outlet.
3. Do not place a thing on the foot controller.
CAUTION :
Perform these following steps when you are not using your
sewing machine.
1. Turn the power/light switch off. (Press
side).
2. Be sure to remove the power plug from the wall outlet.
3. Do not place a thing on the foot controller.
CAUTION :
Be sure to turn OFF the power switch before plugging/un-
plugging the controller.
9
To Next Page
Loading...
Need help?
General
