ENGLISH
– 11 –
#
. FOR THE OPERATOR
1. Operation of SC-510
1) Press ON button
1
of the power switch to turn
ON the power.
(Caution) When the buzzer is kept beeping imme-
diately after turning ON the power, press
OFF button
2
on the sewing machine to
turn OFF the power since connection of
the cord or power voltage may be wrong.
1
2
2) When the needle bar is not in its UP position, it automatically rotates to reach the UP position.
(The motion differs by the selection of the machine head.)
(Caution) 1. When turning ON the power for the rst time, it will be slightly delayed since initialization is per-
formed.
2. When turning ON the power, do not place your hands under the needle.
[When operation panel is connected]
[When operation panel is not connected]
Display of power ON
When operation panel (CP-160, and IP-110) is
used
Power lamp of CP-160 or IP-110 lights up.
Two dots
B
of the number indicating window at the
front cover of control box light up.
(Caution) When the buzzer continues sounding im-
mediately after turning ON the power, the
cord may not be properly connected or
power voltage may be not proper. Press
OFF button
2
of the power switch to turn
OFF the power.
When operation panel (CP-160, and IP-110) is
not used
LED of the display of reverse stitching or over-
lapped stitching at the front cover of control box
lights up. (
A
)
*
The power display LED that is built in the ma-
chine head lights up according to the machine
head.
B
A
To Next Page
Loading...
Need help?
General
