ENGLISH
– 25 –
6
Setting of the needle bar stop position when the sewing machine stops (Function setting No. 10)
The position of the needle bar when the pedal is in its neutral position is specied.
0 : Down The needle bar stops in the lowest position of its stroke.
1 : Up The needle bar stops in the highest position of its stroke.
When connecting CP-160, holding pressing needle up/down compensating switch
1
, turn ON the power
and the stop position can be changed.
7
Sound of click of the key switch mounted on the PSC box (Function setting No. 1
1)
This function selects whether the sound is effective or ineffective when operating the four key switches
mounted on the PSC box.
0 : off The sound of click is ineffective.
1 : on The sound of click is effective.
0
0
1
1
1
1
1
(Caution) If the stop position of the needle bar is set to the highest position, the thread trimming
action will be taken after the needle bar comes down once to the lowest position.
n P
L o
n P
U P
Down stop position
Up stop position
To Next Page
Loading...
Need help?
General
