Table 50 on page 108 lists AC power cord specifications provided for each country or
region.
Table 50: AC Power Cord Specifications
Plug StandardsElectrical SpecificationsCountry
AS/NZ 3112–1993250 VAC, 10 A, 50 HzAustralia
GB2099.1 1996 and GB1002 1996 (CH1-10P)250 VAC, 10 A, 50 HzChina
CEE (7) VII250 VAC, 10 A, 50 HzEurope (except Italy and
United Kingdom)
CEI 23–16/VII250 VAC, 10 A, 50 HzItaly
JIS 8303125 VAC, 12 A, 50 Hz or 60 HzJapan
NEMA 5-15125 VAC, 10 A, 60 HzNorth America
BS 1363A250 VAC, 10 A, 50 HzUnited Kingdom
Figure 51 on page 108 illustrates the plug on the power cord for each country or region
listed in Table 50 on page 108.
Figure 51: AC Plug Types
NOTE: Power cords and cables must not block access to router components or drape
where people might trip on them.
For information about the AC power supply, see “J2320 and J2350 Services Router
Hardware Features” on page 13 and “J4350 and J6350 Services Router Hardware
Features” on page 26.
To connect the power cord during initial installation, see “Connecting
Power” on page 122.
To replace the AC power cord, see “Replacing AC Power Supply Cords” on page 193
and “Replacing DC Power Supply Cables” on page 196.
DC Power, Connection, and Power Cable Specifications
Each DC power supply has a single DC input (–48 VDC and return) that requires a
dedicated circuit breaker:
108 ■ Power Guidelines, Requirements, and Specifications
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide
To Next Page
Loading...
Need help?
General
