Juniper J-series Services Router J2320 User Manual

Displaying a Secure Access Configuration
Purpose Verify the secure access configuration.
Action From the J-Web interface, select
Configuration>View and Edit>View Configuration Text. Alternatively, from
configuration mode in the CLI, enter the show system services command.
The following sample output displays the sample values for secure Web access as
configured in Table 60 on page 156.
[edit]
user@R0# show system services
web-management {
http;
https {
port 8443;
local-certificate new;
}
}
What It Means The output shows the intended secure access configuration.
See Also For more information about the format of a configuration file, see the J-series Services
Router Basic LAN and WAN Access Configuration Guide.
Displaying a Secure Access Configuration ■ 159
Chapter 8: Configuring Secure Web Access

Juniper J-series Services Router J2320 Specifications

General

Brand	Juniper
Model	J-series Services Router J2320
Category	Network Router
Language	English